GSM Mobile Wireless Burglar Security System Home Alarm

Alarm System Features:
1. Super GSM wireless signals, voice prompt, ease of use. Can install GSM SIM card.
2. Allow up to 6 wireless zones and 4 wired zones.
3. Each can be defined as one of the 5 zone types including NORMAL, STAY, INTELLIGENT, EMERGENCY, CLOSED.
4. 6 groups voice alarm telephone number, 3 groups for SMS messaging. SMS notification for AC power outage will be sent to 3 groups SMS number and dial the 6th group voice alarm phone number.
5. Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice message is 10 seconds.
6. Telephone (phone)/SMS long-distance control for arming, disarming, monitoring, remote announcement.
7. 1 Set of normally open signal outputs, relay linkage output, home appliances remote control can be realized.
8. Built-in Ni-Hi rechargeable battery and automatically switchable upon power failure, and notification will be sent via SMS.

Operation password
1234
Siren Volumn
99
1-10 defence zones attribute
Normal zones
Siren Sound
1 minute
Delay ARM
No
7-10 wired zones
Normal, NO
SMS Message
Enable
Integrated Alarming
Enable
GSM Module
Enable
Audible confirmation for remote operation
Enable
Delay alarming
Disable
1-10 Zone alarm
Siren sound enable
1-10 Zone SMS message content
Xx Zone alarm
Home alarm System Components and Usage:
ARM
The system is at a fully ready status where all detectors are activated in a working state, when the some events ( burglar, fire, gas leak, etc ) happened and detected, , alarm system alarm right away. In a ARM status, the panel [ ARM ] light is on. To activate using remote control: Press [ ARM ] key once.
DISARM
All sensors are deactivated and will not be respond to any events. In a DISARM status, the panel [ ARM ] light is off. To activate using remote control: Press [DISARM] key once.
EMERGENCY
When an emergency occurs, press the emergency button on the remote control host into the emergency state.
System Setup
-------Panel Setup
Alarm panel should be installed at a central location with best transmission to all the wireless sensors and accessories. Keep the panel well away from large metal objects or household appliances with high-frequency interference, and avoid barriers such as concrete walls with metal frame inside and fire doors.
--- SIM Card installation
SIM card installation is simple. Firstly remove the cover of SIM card slot at the back of the alarm panel and then place the card according to direction indicated. Make sure the cover of SIM card slot is fixed suitably
Technical Parameter:
1)Input voltage: DC9V-12V
2) Standby currents: < 25 m A
3)Alarm current: 450 m A
4)Wireless frequency: 315/433/868/915MHz, 2262/1.5-4.7M, EV1527/300K
5)GSM Format: Support GSM850/900/1800/1900MHz (option)
6)Backup battery: NI-HI AAA*6 DC7.2V
Standard Package list:
Mainframe X1
Remote contol X2
Mini Siren x 1
Wireless PIR Motion Sensor X1
Wireless Door magnetic Sensor X1
AC/DC AdaptorX1
User Manual X1